Hi All,
From the G3X installation manual;
"Although mounting the GSU 25 to the threaded holes on the back of the GDU 4XX display is not generally recommended due to instrument panel flexing ..."
I would like to know if anybody has mounted the GSU 25 to the GDU 460 on a standard RV8 instument panel and has experienced "panel flexing"? Or the rigidity of a standard panel for that matter. If it is susceptible to any flexing in the finished configuration.
I was curious if the RV8 panel is less prone to flexing because of the narrower fuselage.
Thanks in advance,
Roger.
From the G3X installation manual;
"Although mounting the GSU 25 to the threaded holes on the back of the GDU 4XX display is not generally recommended due to instrument panel flexing ..."
I would like to know if anybody has mounted the GSU 25 to the GDU 460 on a standard RV8 instument panel and has experienced "panel flexing"? Or the rigidity of a standard panel for that matter. If it is susceptible to any flexing in the finished configuration.
I was curious if the RV8 panel is less prone to flexing because of the narrower fuselage.
Thanks in advance,
Roger.