We got the electric flap conversion kit for my buddies RV-4. We got the more expensive one with the entire new weldment. We are going through the instructions and making up the parts and all seems well. One minor problem that I was going to call Vans on is the part A-406. I figured I would post here also. This is the steel channel that gets bolted into the plane and holds the stationary end of the actuator. They say to make this part up a certain way but it comes all made and painted. But the big end that holds the nub end of the actuator has too big a radius on it. They show it at 1/2" and it is, but the nub end of the actuator sticks out only 3/8". I think I have to grind the radius down so it fits on the actuator but figured I would ask here first. I would hate to screw it up. Thanks for any help.
Richard
Richard