VAF Forums

VAF Forums (http://www.vansairforce.com/community/index.php)
-   My RV Build Project (http://www.vansairforce.com/community/forumdisplay.php?f=108)
-   -   Marshall's RV9A (http://www.vansairforce.com/community/showthread.php?t=179425)

RV10Man 02-10-2020 06:00 AM

Marshall's RV9A
 
I purchased an RV9A project October 2018 from a member here on VAF. I jsut recently figured out how to post links to photos on my FB page, so here's a couple of recent ones

https://www.facebook.com/photo.php?f...0kIv-Ero50lGiF

gfb 02-10-2020 08:11 AM

In your HS pic when you say you filled the tip, I hope you didn't actually fill it but covered it with a piece of cloth and a skim coat of micro? :)

RV10Man 02-10-2020 09:04 AM

Quote:

Originally Posted by gfb (Post 1406843)
In your HS pic when you say you filled the tip, I hope you didn't actually fill it but covered it with a piece of cloth and a skim coat of micro? :)


lol. Yeah, it's got a plug of foam in it, the micro/epoxy is only about 1/8' thick.:) Actually, I used a piece of 1/8" balsa wood.

RV10Man 02-10-2020 02:41 PM

I just realized, I should have this in the "my RV build" sub forum. I'd appreciate it if a moderator would move it.

Steve Melton 02-26-2020 12:21 PM

I think it's going to be a good one.

scrollF4 02-26-2020 12:34 PM

Quote:

Originally Posted by RV10Man (Post 1406927)
I just realized, I should have this in the "my RV build" sub forum. I'd appreciate it if a moderator would move it.

Done. Move complete.

RV10Man 02-29-2020 07:36 PM

I haven't posted much lately, but I actually have been working on the airplane. I got the panel powder coated last week and have been working on getting all the G3X boxes mounted.

https://www.facebook.com/marshall.al...91200407599810


All times are GMT -6. The time now is 12:40 AM.