VAF Forums

VAF Forums (http://www.vansairforce.com/community/index.php)
-   RV-14 (http://www.vansairforce.com/community/forumdisplay.php?f=109)
-   -   Engine mount isolators (http://www.vansairforce.com/community/showthread.php?t=161436)

Arablenz 06-16-2018 08:45 PM

Engine mount isolators
 
Always a weekend when I need to ask Vans aircraft a question! I went to hang my engine today but when I opened the engine isolator boxes ,which are the Dyna VI- STD, I found that the part number on the isolators different from Vans instructions on page 43-08.
Instead of vip 51901-73 or vip 50900-71, I have vip 50011-20.
They look correct but don't want to install until I am 100 percent happy with the part numbers.
Has anyone else had the same issue?
Thanks.

Tom023 06-16-2018 09:07 PM

Mine were also VIP 50011-20, fit correctly and actually had to call Vans about them because one of the center spacers was too small in diameter to let the bolt through, so part number was verified.

Arablenz 06-16-2018 09:12 PM

Thanks for quick reply. They obviously went through a verification process then. I went to the Vibration Isolator products page but couldn't find the part numbers to cross reference against.


All times are GMT -6. The time now is 05:02 PM.