VAF Forums

VAF Forums (http://www.vansairforce.com/community/index.php)
-   RV-14 (http://www.vansairforce.com/community/forumdisplay.php?f=109)
-   -   For those with mostly assembled or flying 14s (http://www.vansairforce.com/community/showthread.php?t=164050)

Bavafa 09-10-2018 10:16 AM

For those with mostly assembled or flying 14s
 
On page 10-12, there are some nutplates (two corner type and two in the vertical position) that I cannot figure out what they are used for. These are in the middle section of the F-01406B bulkhead, figure 3.

Just wondering if anyone knows what gets attached to these.

rvbuilder2002 09-10-2018 10:27 AM

2 corner and one straight (K1000).... used to attach the aft flange of the center tunnel cover on the baggage floor.

Bavafa 09-10-2018 10:36 AM

Quote:

Originally Posted by rvbuilder2002 (Post 1287430)
2 corner and one straight (K1000).... used to attach the aft flange of the center tunnel cover on the baggage floor.

Thank you Scott, you are absolutely right. For some reason I thought the tunnel cover shares the same nutplate as the baggage door but it does not.

Do you know if the two vertically positioned are used for anything?

I mainly want to make sure I am not missing anything.


All times are GMT -6. The time now is 11:59 PM.