VAF Forums

VAF Forums (http://www.vansairforce.com/community/index.php)
-   RV-8/8A (http://www.vansairforce.com/community/forumdisplay.php?f=6)
-   -   Show us the status of your 8/8A project! (http://www.vansairforce.com/community/showthread.php?t=1741)

DeltaRomeo 05-28-2005 03:15 PM

Show us the status of your 8/8A project!
 
(Instructions on inserting images into messages can be found at http://www.vansairforce.net/article...rums/images.htm)

Best always,

TShort 05-28-2005 05:17 PM

Getting close to finishing the empennage:

rudder and VS done (except fiberglass)



just bent the L elevator skin tab today (not as bad as I thought) - elevators are ready for riveting:



Wing kit to ship 6/6

Thomas

rvpilot 06-05-2005 07:05 PM

RV8 Project
 
Getting REAL close!!

Barefoot Billy

Rick6a 08-03-2005 04:35 PM

Matched Hole...just too easy
 
All fiberglass tips installed with #4 or #6 screws and nutplates.


This thing practically fell together in a few weeks of part time work. The vertical stab was built in just one day not counting waiting for the interior primed parts to dry. Matched hole...just too easy.

Rick Galati (pre matched hole) RV-6A "Darla" 58 hours
RV-8A empennage done

rv8guy 08-03-2005 08:01 PM

Just put the wings on
 
7tears four months and getting there


Ironflight 09-15-2005 03:30 PM

Testing Picture Posting....
 
OK, OK, I'll join the 21st century and see if I can post a picture....



Almost ready for inspection! :D

Paul Dye

rv8ch 09-15-2005 03:38 PM

Which RV?
 
Looks like you could not decide which type of RV to buy, so you
got both - the flying type and the camping type! :)

Nice looking 8 - please post some more pictures.

Keeping with the spirit of this thread, here's my latest status. Notice that mean looking MT prop!

(click for full story and larger images)


Ironflight 09-15-2005 05:05 PM

OK, here are a few more Mickey...
 
I think I've got this figured out now...of course, the outside looks like the outside of any other unpainted RV-8, so here are some interior shots:

Left side of the cockpit...



Right side of the cockpit...



A Shot of the DJ Lauritsen Interior....



And the panel I put on another thread!

Oh, the four-wheeled RV belongs to my "Ex", who is letting me use it as a break room during assembly work at the airport - very nice, except that the 15 Amp circuit at the hanagr can't support the A/C and the shop air compressor at the same time....but it's nice to have a restroom, soft couch, and a place to keep drawings!

Paul Dye

N282RV 02-28-2006 03:48 AM

pretty self expainatory

tinman 02-28-2006 06:28 AM

Tinman's Ride- Wings On
 


All times are GMT -6. The time now is 05:28 AM.