Hi All,
I am wanting to install the Avstar AVX-5VA1 throttle body/injector servo on the IO-360M1B I purchased from Vans, and had acouple of questions regarding the install process and documentation.
First, the RV-7 firewall Forward instructions say nothing about the throttle body installation that I can find, and secondly the drawing OP-22 that shows the throttle and mixture attachments seem to indicate that the outlet should be on top and not the bottom, and that the throttle and mixture arm clocking is incorrect.
If someone is able to point me in the direction of some more comprehensive installation documentation I would greatly appreciate it.
If there isn't any such documentation, then I gather I should install the gasket dry and torque 5/16" nuts to 204-228 in lb (with new star lock washers) and simply re clock the mixture and throttle arms so that the suit the position of the cable locations provided in the firewall forward package?
Cheers.
Tom.
I am wanting to install the Avstar AVX-5VA1 throttle body/injector servo on the IO-360M1B I purchased from Vans, and had acouple of questions regarding the install process and documentation.
First, the RV-7 firewall Forward instructions say nothing about the throttle body installation that I can find, and secondly the drawing OP-22 that shows the throttle and mixture attachments seem to indicate that the outlet should be on top and not the bottom, and that the throttle and mixture arm clocking is incorrect.
If someone is able to point me in the direction of some more comprehensive installation documentation I would greatly appreciate it.
If there isn't any such documentation, then I gather I should install the gasket dry and torque 5/16" nuts to 204-228 in lb (with new star lock washers) and simply re clock the mixture and throttle arms so that the suit the position of the cable locations provided in the firewall forward package?
Cheers.
Tom.