Bayou Bert
Well Known Member
Thinking of mounting the two magnetometers on the rear deck
of my 9A in front of the HS/VS. Wiring for elevator trim, position lights
and strobe have to be at the bottom of fuselage. Cables for the rudder too.
Planning on mount the dual AHRS right of centerline just
behind baggage bulkhead. I already have the pitch servo and the power supply for the Whelen strobes there
on other side of center line.
Is this going to work?
of my 9A in front of the HS/VS. Wiring for elevator trim, position lights
and strobe have to be at the bottom of fuselage. Cables for the rudder too.
Planning on mount the dual AHRS right of centerline just
behind baggage bulkhead. I already have the pitch servo and the power supply for the Whelen strobes there
on other side of center line.
Is this going to work?