alpinelakespilot2000
Well Known Member
I seem to remember someone asking this question before, but can't find it...
For the elevator trailing edges, the AEX comes undrilled. Instructions say to draw a reference line 7/32 to 1/4" from FORWARD edge of AEX and drill on that line.
If I do so, the AEX sticks out significantly beyond the trailing edges of the elevator skins. Is this normal? Is it left there or is it eventually ground down to be flush with the edges of the skins?
Any suggestions?
thanks,
Steve
For the elevator trailing edges, the AEX comes undrilled. Instructions say to draw a reference line 7/32 to 1/4" from FORWARD edge of AEX and drill on that line.
If I do so, the AEX sticks out significantly beyond the trailing edges of the elevator skins. Is this normal? Is it left there or is it eventually ground down to be flush with the edges of the skins?
Any suggestions?
thanks,
Steve