As the fuselage begins to progress and I am nearing the infamous chapter 29. I am beginning to have that overwhelming feeling of a huge amount of decisions to make.
Are any of these necessary now?
For example, I am getting ready to mount the firewall assembly to the lower fuse skin. Can I omit the fuel pump mount, filter mount and the transducer mount? I don't know what I am planning on installing and would prefer to not have unnecessary mounts in the way that may need to be removed.
I have decided on Garmin so I purchased the autopilot mounts (roll, pitch and yes a plunked down that ridiculous amount for the yaw damper mount) but haven't figured out wiring and connectors.
One piece of advice I got at OSH was try and build the whole plane then begin to do the work of outfitting the airframe. Is that feasible?
Thanks in adance
Are any of these necessary now?
For example, I am getting ready to mount the firewall assembly to the lower fuse skin. Can I omit the fuel pump mount, filter mount and the transducer mount? I don't know what I am planning on installing and would prefer to not have unnecessary mounts in the way that may need to be removed.
I have decided on Garmin so I purchased the autopilot mounts (roll, pitch and yes a plunked down that ridiculous amount for the yaw damper mount) but haven't figured out wiring and connectors.
One piece of advice I got at OSH was try and build the whole plane then begin to do the work of outfitting the airframe. Is that feasible?
Thanks in adance