Kyle Boatright
Well Known Member
Any thoughts on how to shave the delrin guide blocks Planearound supplies with their latch kit? I need to shave 1/32 or maybe 1/16" from the guide blocks that mount to the doors. I understand that you want a tight fit between the door and cabin blocks to eliminate fore/aft slop in the latched doors, but right now, the doors won't close.
The other issue is how to shave them evenly while creating a presentable surface. A belt sander probably isn't the answer and I can't think of a safe way to do it with a tablesaw, router, jointer, or any of the other finger removal devices at my disposal.
The other issue is how to shave them evenly while creating a presentable surface. A belt sander probably isn't the answer and I can't think of a safe way to do it with a tablesaw, router, jointer, or any of the other finger removal devices at my disposal.