VAF Forums

VAF Forums (http://www.vansairforce.com/community/index.php)
-   RV-12/RV-12iS (http://www.vansairforce.com/community/forumdisplay.php?f=73)
-   -   Cotter pin (http://www.vansairforce.com/community/showthread.php?t=171139)

08FATBOY 05-01-2019 07:44 AM

Cotter pin
 
I'm looking for the cotter pin part number for the main wheel axle nut. I checked the assembly manual and the Matco manual, both reference pins but don't supply part numbers

Thanks, Rod

KAdriver 05-01-2019 07:48 AM

Tractor supply buy the assorted kit. Match it up

skydiverlv 05-01-2019 08:02 AM

check your email fatboy, I sent a link. You will never need to order again.

Tony_T 05-01-2019 08:57 AM

Quote:

Originally Posted by 08FATBOY (Post 1343528)
I'm looking for the cotter pin part number for the main wheel axle nut. I checked the assembly manual and the Matco manual, both reference pins but don't supply part numbers

Thanks, Rod

The correct cotter pin for the Matco axle is Matco part #MSC.125X2COTTERPIN - COTTER PIN Z/P. http://www.matcomfg.com/COTTERPINZP-idv-3325-35.html

The description is misleading as it is not a .125 cotter pin but, I think, a metric size that is slightly smaller diameter. A 1/8" cotter pin is nearly impossible to put in the hole. The Z/P probably means zinc plated as the pin is silver in appearance.

08FATBOY 05-01-2019 11:42 AM

Cotter pins
 
Thanks for the Matco part number


All times are GMT -6. The time now is 07:15 PM.