VAF Forums

VAF Forums (http://www.vansairforce.com/community/index.php)
-   RV-7/7A (http://www.vansairforce.com/community/forumdisplay.php?f=7)
-   -   Show us the status of your 7/7A project! (http://www.vansairforce.com/community/showthread.php?t=1745)

DeltaRomeo 05-28-2005 03:18 PM

Show us the status of your 7/7A project!
 
(Instructions on inserting images into messages can be found at http://www.vansairforce.net/article...rums/images.htm)

Best always,

mark manda 05-28-2005 06:36 PM

174mm reserved
 
getting ready for the big push. my own V day. hard to describe exactly where I'm at. all over. :)


sixty more ft of wire from ACS this morning should get the wiring done.


in need of TLC

www.pbase.com/mark2nite

Jamie 05-28-2005 10:45 PM



Empennage, Slow-Build Wings Done, Slow-Build Fuse is Flipped...Working on Fuse Innards.

Scott Will 05-30-2005 10:43 AM

Starting on the canopy... gathering instruments & avionics, thinking about the engine...


Captain_John 05-30-2005 07:44 PM

Not much longer now! Maybe about another ten minutes! That's what I tell people who ask!

This week I am starting on the tanks! My ProSeal is on order along with my flop tube!



:D CJ

Mark Burns 05-30-2005 10:31 PM

This is where I'm at.
 


Slow build wings due in a few weeks.

Louavul 05-31-2005 12:47 PM

Status 70289
 
This was riveted together over the holiday weekend.

Next step, the center section.

Getting closer to seeing the light at the end of the tunnel.





Steven L. Hild
La Vernia, TX
RV-7 N590SC (res)

Derrell 05-31-2005 03:54 PM

Put together & take it apart. Here we have drilled the rear spar. At present, wingroot fairings & platenuts have been fitted. Wing tips have been adjusted
& Creative Air Nav lights & landing lights installed. Presently working on the instrument panel.

http://img204.echo.cx/img204/4327/pc2600038ln.jpg

Derrell Brooks
derrell@brandywineprinting.com

SonoraMike 05-31-2005 04:04 PM

I'm here, they just arrived today





kevinh 05-31-2005 11:50 PM

My RV-7A is almost no longer a project, more like an airplane. I think about five weeks till first flight. The latest pictures are on my
build log , but here's one from when we attached the wings:



All times are GMT -6. The time now is 04:19 PM.