What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Washers for seat belt anchor attach bolts

Draker

Well Known Member
Hi, everyone,

The plans include the following bolt/washer/nut callout for the seat belt anchor to bulkhead attachment:

AN3-5A BOLT (6A for the outboard anchors)
AN960-10L WASHER
AN960-10 WASHER
AN365-1032 NUT

Wanting to confirm which washer goes against the bolt head and which one goes against the nut. Can I assume, as a general rule, that the callouts in the plan always list the pieces "in order", in other words that the washer that is listed just under the bolt call-out is the washer that goes up against the bolt head?
 
I would assume the specified washer thickness(s) are to accomodate the bolt length and desired 3 threads showing after the nut is tightened down. I don't think order of washer placement matters.
 
Back
Top