VAF Forums

VAF Forums (http://www.vansairforce.com/community/index.php)
-   RV-4 (http://www.vansairforce.com/community/forumdisplay.php?f=9)
-   -   Show us the status of your RV-4 project! (http://www.vansairforce.com/community/showthread.php?t=1746)

DeltaRomeo 05-28-2005 03:19 PM

Show us the status of your RV-4 project!
 
(Instructions on inserting images into messages can be found at http://www.vansairforce.net/article...rums/images.htm)

Best always,

Dayton Murdock 05-28-2005 07:02 PM

Dayton's RV4 progress
 

The next thing is to go after the gear leg fairings

pmercier 05-29-2005 11:22 PM

My RV-4
 


Finishing up the interior.

Dayton Murdock 06-22-2005 10:06 PM

To The Hanger
 
I trailered my Fuselage to the hanger tonite.


This is the Hitch that I used ( Tail Wheel Aircraft are Great!)


I knew that my son's VW towing lights be would handy.

garnt.piper 06-23-2005 02:41 AM

Canopy Skirt
 
Hey Dayton, nice job on the canopy skirt around the back. Not many people proudly show that part of their project off! (I'm one of them...). Rest looks good also.

Grant

pmercier 11-04-2005 08:54 AM

RV-4 Status
 


Getting the cowl fitted and the baffling done. Getting closer to having a finished RV.

Philip Mercier
RV-4
Abbotsford BC.

pmercier 12-13-2005 05:28 AM

RV-4 status
 


I installed the wings for some final fitting, hopefully the next time will be the last.



Left flap fitted and electric flap servo fully functional.

Philip Mercier
Abbotsford BC.
http://members.toast.net/pmercier/project2/index.html

PlaneBuilderBill 12-21-2005 07:55 AM

Canopy Install Info
 
Dayton,

Great job on the Canopy installation!
Care to relate to the rest of the "canopy yet to be installed crowd" your method of creating the nice bend and fit of the skirt to the canopy on your plane. I've done some tests using the method that's in the building manual and have had no luck at all. I've also heard that there's an edge-seaming tool (similar to one that Bob Avery sells... the one with two small nylon wheels only larger), but I have no idea where to even look at one, much less try it and possibly buy it.

I think I speak for all the "canopy yet to be installed crowd" that your sage words of experience would be very appreciated!

Thanks in advance,

Bill Freckman
Grapevine, TX

Dayton Murdock 12-21-2005 08:33 AM

Canopy Building
 
Thanks for the kind words Bill

I uploaded my builder log to the web on the Kitlog.com web page Go there and look at my web page and the procedure for the canopy is there. I hope that will help, Also if you do a search on Vansairforceforums for starting canopy my thread may come up :)

Andy Duff 12-21-2005 10:09 AM

Canopy Seaming Tool
 
Bill,
I've got the tool. It's currently in the hanger, but I was going over to the hanger sometime today anyway to prep everything for my Christmas flight to Ft. Myers. Since I live in Bedford, maybe I could just drop it off at your house sometime. Give me a call.
Andy


All times are GMT -6. The time now is 02:14 AM.