Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

RV7 To Go
Reaction score
7

Latest activity Postings About

    • RV7 To Go
      Are you speaking about the overhead safety latch engaging? If so you might be able to use a coat hanger wire or welding filler wire bent...
    • RV7 To Go
      Wow. Just received a WW 300 series for my 8 last Monday. Guess I lucked out on the timing!
    • RV7 To Go
      RV7 To Go replied to the thread Which window adhesive?.
      Well, I can't speak to windows on the 10 or the SilPruf but I have used Sika on my 7 tipper and on my under construction 8 (just...
    • RV7 To Go
      RV7 To Go replied to the thread Add step to RV-7.
      I added a step to the passenger side of my flying 7 a few years ago. Not too difficult...just follow the Vans instructions. Be sure to...
    • RV7 To Go
      On both my 7 and 8 the motor mount holes fit the bolts with a nice slip fit. Not sure about the 14 but I would check the bolt size.
    • RV7 To Go
      RV7 To Go replied to the thread Weight and Balance.
      I have had 2 RV4's. The first was 947 BEW and 71.53" CG and the second 984 BEW and 71.76" both same datum as yours. Both had light...
    • RV7 To Go
      RV7 To Go replied to the thread Step ....
      I think the best thing would be to talk to this man who makes, or at least used to, the steps. Russ McCutcheon 360-334-0688 The 6/7A...
    • RV7 To Go
      RV7 To Go replied to the thread Step ....
      I don't have a Rocket but I installed a step on my 7 passenger side for my vertically challenged wife. I shortened it 3" to split the...
    • RV7 To Go
      I currently use the Perihelion switch in my 7 with LED lights and no current limiter. I have run them all flight (don't fly at night)...
    • RV7 To Go
      RV7 To Go replied to the thread Fly-Away Kit/Innertubes.
      I use the spare tube when changing tires and put a new tube in the spare kit to keep it fresh. The tube is in my tool bag in the back...
    • RV7 To Go
      RV7 To Go replied to the thread Fuel vent check procedure.
      I use the 205. Do the caps at the annual. Just needs a light film on both o-rings. Use it to lube the standard Vans fuel valve if you...
    • RV7 To Go
      RV7 To Go replied to the thread Don't Do This...
      I believe that the issues discussed were, the heat radiating from the exhaust pipe through the shield and clamp into the fuel line could...
    • RV7 To Go
      RV7 To Go replied to the thread Mounting a step on RV-8.
      I installed a step on my RV7 on the passenger side, shortened 3". I think it would have been ok full length but works great as modified...
    • RV7 To Go
      Thanks Mike! Just ordered a pair of Suspa C16-21572 struts from AMAZ.... for $38 Cdn delivered. Looking forward to replacing the current...
    • RV7 To Go
      From the pics it looks like the "new" separator is connected to the breather and the "old" looped one is doing nothing. Remove the...
  • Loading…
  • Loading…
Back
Top