Rick_A
Well Known Member
Is anyone using an MVP-50 with a Lightspeed ignition?
I'm using a Plasma II and have it wired per the instructions (pin 6 out on LSE to RPM input on MVP-50). On the first start I had the MVP-50 input mapping set to the default probe type. After talking to EI, I changed the probe type to "R-1-4H < 9K" but this did not help.
If you have a similar configuration, I'd like to know which probe type you selected on the MVP-50.
I know the ignition is working because I do get a good RPM reading on the Lightspeed LCD.
I'm using a Plasma II and have it wired per the instructions (pin 6 out on LSE to RPM input on MVP-50). On the first start I had the MVP-50 input mapping set to the default probe type. After talking to EI, I changed the probe type to "R-1-4H < 9K" but this did not help.
If you have a similar configuration, I'd like to know which probe type you selected on the MVP-50.
I know the ignition is working because I do get a good RPM reading on the Lightspeed LCD.
Last edited: