Taxi Position Latch

I'd love to see pictures of all the different taxi position latches that 4 builders have designed for their canopies. I've only seen one or two, but I know there are a lot of good designs out there that I haven't seen.

Steve Zicree

Latch position for venting

Steve again thank you for the procedure for building the canopy, finally finished after 2 months 146 hours. I welded tabs inboard about 1 and half inches for the latch rods front and back. then the holes are inboard and the upper hole 2 and half inches up are still inside the plane.
Ted

Taxi Latch

Here are photo's of my taxi latch. A big thanks to Bob Avery for giving me the idea.