What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

RV6,tip up,150 hp engine,taco cable

I am installing a 2 1/4 in new taco instrument on the lower edge of the inst panel just offset from the centreline.I bought a 32" taco cable from spruce but it will definitely be too long.With the 150 hp engine anyone got an idea on what length taco cable will do the job,with a hole in the sub inst panel such that the cable makes its way in a reasonable straight line thru to the engine? I reckon it should be about 28" but l havent hung on the engine yet.
The distance l am measuring is from the absolute end of one ferrule to the absolute end of the other knurled nur.
cheers frangatang
 
Posting

You may want to put this question on the builders tips forum. It might get get a larger audience. :)
 
Back
Top