Thanks. That is what I thought. I assume that the sump screen is only serviced upon overhaul?Mark Burns said:The oil fliter takes the place of the oil screen.
There will still be a suction screen in the sump though.
Mark
JonJay said:Thanks. That is what I thought. I assume that the sump screen is only serviced upon overhaul?
robertahegy said:The screen should be cleaned at least every 100 hrs. They can plug and you will fry your engine.
Roberta
robertahegy said:The screen should be cleaned at least every 100 hrs. They can plug and you will fry your engine.
Roberta
...and don't forget to buy a new STD-111 (or MS35769-21) copper crush gasket first.... the old gasket should not be re-used....
gil in Tucson
Gil,
Do you know if this is the same part number used for a Lyc 0-320 B and does it look like a small copper ring?
thanks,
Chuck Olsen
RV7A
TSP