Rivets below the tail spring mount -7 QB

I have a -7 QB fuse. I am riveting the aft bulkhead F-712 to the lower skin. I am wondering how others have installed the lower four rivets below the WD-409 tail spring mount. If blind rivets are the only option which ones are best?

Thanks in advance,

Ed

F-712 rivets

Hi Ed, I thought I was being pretty clever getting all the AN rivets in except for the 4 below the tail spring. I sure didn't see any way to get a bucking bar down there! I ordered some blind rivets from vans and pulled those 4. They look okay, and whos going to look down there anyway. I will have to go over to my shop to get a part number, if you need it. Call me on my cell - 509-429-3816.

Don Owens
springcanyon

I used Cherry Max blind rivets there, CR3212-4-X.