fstringham7a
Well Known Member
I am in the process of wiring the tail / wing strobes. I have grounded each ground wire at the power pack location by bundeling them together and securing them to the strobe power pack base. Now the ??? At the strobe end should the ground wire be grounded at this point or taken back to the fairwall ground block and why. Also, does the foil shield get any special treatment or just terminated at each end with no attachment to the airframe. I have read the historical threads on this subject but need a little reinforcement!
TIA
Frank @ SGU and SLC wiring / fiberglassing RV7A
TIA
Frank @ SGU and SLC wiring / fiberglassing RV7A