Bucking bars

Hello group,
I am having a problem bucking the trailing edge rivets on the tip rib of rudder. Does anybody know what will work? Looking thru Avery's catalog, the no-hole yoke for squezzer might work. Thanks in advance

Brent Colvin
7emp

I have used no hole yokes for both the Taco and the "generic" pneumatics. On both I ground them down just a bit more to get clearance into the tight areas with good success. I think, though, on the rudder tip I still had to use a pop rivet on the very last one ... just too tight for a yoke to get in there.

Yes, I had to use a pop rivet in the last one. Even with a thin-nose yoke.

- Scott