Fuse jig sketch 39

Looking for a copy of sketch 39 for the -3 fuse jig. any help would be appreciated. Call Larry at 505-330-6926

Larry, did you ever get a copy? If not let me know and I'll scan it out of the builder's manual for you. It's in the manual and you should already have it. One note, I think four legs instead of six, as depicted in the plans, is the way to go -- it's easier to level and plenty strong if you use 2x6s for the site plate. Here's a pic of mine...

http://www.romeolima.com/RV3works/Gallery/DSC_0473.JPG

Jig DWG

Randy
Thanks for the photo it helps a bunch. I did get the sketch from Hank Gallagher.
Larry