Static line routing

What would be the suggested way to route static (and pitot) lines forward of the baggage area (eg. where to drill through F-705 bulkhead etc..)

Thanks!

On my RV-6, I ran them underneath the canopy rails. That works although it's a little tight and tough to run. On my Rocket, I ran them along the floor with the wiring loom from the tail.

Either way, it probably doesn't matter much. I think I like having it on the floor better so that if I ever have to replace the line, it will be much easier to do.

I followed Walter's lead. See the 7/5/04 entry at http://www.rv7-a.com/avionics.htm.

Dave