Parts substitutions

Randy- on your site you recommend "? Use flap fairings from the RV-8 (p/n F-872CPP-L and F-872CPP-R), which are fully formed, rather than the supplied parts." Can you post a photo of this on your site?

Also - Flap/fuselage interface
Often times the bottom of the flap doesn't line up flush with the bottom of the fuselage so this can be a place builders struggle to know what to do. Here's a pic showing how I did mine, as noted above I used RV-8 flap fairings. Again, would it be possible to post a photo of your installation on the site?

Many thanks in advance.

-Bob

I do have some pics of the flap fairings but without the wings mounted. I neglected to take pics of the flap/fuselage interface when I had the wings fitted, therefore I'll need to wait until I do final assembly to take pics of that... very sorry. I'll try to dig up the flap fairing pics and post them soon.

Ok, I went back and added a pic of my RV-8 fairings. It does not show the wing nesting into it and it's also a BAD pic, sorry. Scroll down in the Wing section...

http://www.romeolima.com/RV3works/Airframe/airframe.htm#Wings